Sony STR-DA3300ES Operating Instructions Manual page 45

1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 38).
2
Press V/v repeatedly to select
"Settings," then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Auto Calibration," then press
or b.
4
Press V/v repeatedly to select
"Quick Setup," then press
5
Press V/v repeatedly and
un-check the items you do not
want to measure.
• Speaker Distance
• Speaker Level
• Frequency Characteristic
1
6
Press b.
7
Press
2-7
8
The measurement starts in five
seconds.
or b.
9
Measurement starts.
The measurement process will take
approximately 30 seconds with a test
tone. Wait until the measurement process
completes.
.
to
to select "Start."
continued
45 GB