Sony STR-DA3300ES Operating Instructions Manual page 13

Name Function
S DVD/ Press to display the menus of
the DVD player on the TV
TOP MENU,
screen. Then use V/v/B/b and
MENU
to perform a menu
operations (page 118).
Press AMP (6), then press
NIGHT
NIGHT MODE to activate the
MODE
NIGHT MODE function
(page 67).
Press AMP (6), then press
INPUT
INPUT MODE to select the
MODE
input mode when the same
components are connected to
both digital and analog jacks
(page 93).
T MUTING Press to turn off the sound
temporarily. Press the button
again to restore the sound.
U MASTER Press to adjust the volume level
of all speakers at the same time.
VOL +/–
Press TV (e;), then press TV
TV VOL +/–
VOL +/– to adjust the volume
level of the TV.
V DISC SKIP Press to skip a disc when using
a multi-disc changer.
W RETURN/ Press to return to the previous
menu or exit the menu while the
EXIT O
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
X DISPLAY Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
Name Function
Y CLEAR Press to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
Press to select
>10
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
– channel numbers of the
Digital CATV terminal.
Press to enter direct tuning
D.TUNING
mode (page 77, 82).
Z 2CH/ Press to select sound field
(page 59) or to switch the audio
A.DIRECT
of the selected input to analog
signal without any adjustment
(page 113).
Press to select sound field
wj A.F.D.
(page 60).
Press to light up the button. It
wk SHIFT
changes the remote button
function to activate the buttons
with pink printing.
Press to activate the sleep timer
wl SLEEP
function and the duration which
the receiver turns off
automatically (page 100).
Press to enable the TV
e; TV
operation.
ea RM SET UP Press to set up the remote.
a)
See the table on page 118 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
continued
13 GB