Panorama Mode - Sony STR-DA3300ES Operating Instructions Manual

3
While monitoring the sound,
adjust the selected parameter
using V/v and
For details, see following menu
parameters.
Note
The setup items you can adjust on each menu vary
depending on the sound field.
To adjust the effect level
1
Press V/v repeatedly to select the
effect level, then press
2
Press V/v repeatedly to adjust the
level.
Higher settings apply more surround effect.
You can adjust the level from 20% to 120%
in 5% steps.
Custom Settings menu
parameter
x Center Width Control
Lets you perform further adjustments for
Dolby Pro Logic II and IIx Music mode
decoding. You can set this parameter only
when A.F.D. mode is set to "PLII Music" or
"PLIIx Music".
You can adjust the distribution of the center
channel signal, generated through the Dolby
Pro Logic II decoding, to the left/right
speakers.
64
GB
.
in step 2.
x Dimension Control
Lets you perform further adjustments for
Dolby Pro Logic II and IIx Music mode
decoding. You can set this parameter only
when A.F.D. mode is set to "PLII Music" or
"PLIIx Music".
You can adjust the difference between the front
channels and the surround channels.
x Panorama Mode
Lets you perform further adjustments for
Dolby Pro Logic II and IIx Music mode
decoding. You can set this parameter only
when A.F.D. mode is set to "PLII Music" or
"PLIIx Music".
• ON
Lets you enjoy surround sound by spreading
the sound field of the front speakers to the
left and right of the seating position.
• OFF
This function is not activated.
x Screen Depth
This parameter is provided especially for
Cinema Studio EX modes.
Lets you create the sensation that the sound of
the front speakers comes from inside the
screen in your listening room, just like in
theaters.
• ON
Lets you create a sound environment where
you will feel the sound comes directly out of
a large screen in front of you.
• OFF
This function is not activated.
x Virtual Speakers
This parameter is provided especially for
Cinema Studio EX modes.
• ON
Virtual speakers are created.
• OFF
This function is not activated.