Table of Contents
Advertisement
User Guide
Over-Speed alert
Command:
speed1,+ Speed
Notes: The speed must be in km/h in 2 or 3 digitals. (01~255km/h)
Example: speed1,100
Suppose the over-speed alert that we want to set is 100km/h, when the device exceeds 100km/h, it will send the message "Over-speed! +GPS Info" to all registered phone
numbers.
To turn off this function, please send
speed0
to the device.
Movement Alert
Command:
M1, xxxM/KM
Notes:
xxx
must be 3 digitals. M means meters, KM means kilometers
The tracker must be stationary when setting this function
Example: m1,100m
When the tracker moves beyond 100 meters, it will send an SMS alarm to all registered phone numbers. To turn off
this function, please send
M0
to the device.
(The settings must be at least 50 meters)
Hide quick links:
Advertisement
Table of Contents
