Gprs Setting - Keep Track GPS EV07 User Manual

GPRS Setting

To use the GPRS function, the user needs to setup the APN by sending SMS command.
--What is APN? Access point name (APN) is the name used to identify a general packet radio service (GPRS) bearer service in the GSM mobile network. The APN defines the
type of service that is provided in the packet data connection.
*Make sure that the SIM card in the tracker supports the GPRS function. ※ The APN can be acquired from your local GSM operators.
Command: S1, APN, user name, password
Notes: Some access point name without user name and password, so please leave it blank.
Example: S1,internet
"internet" is the APN from the SIM card provider; therefore, the user must set their APN for their own country which the unit resides. After sending the command,
the device will reply "Set APN OK! GPRS connecting" After send S1,APN, wait for a while then you will see device is online.
Set GPRS Time interval by SMS (this can be also set from platform)
Command: TIxxS/M/H
The meaning of "xx", The setting must be in 2 digitals and maximum 99 in value, which means 01~99.
xxS is the time interval in second with range (30~99) xxM is
the time interval in minute with range (01~99) xxH is the time
interval in hour with range (01~99)
Example: TI01M
The device will reply "Set updating time interval OK!" and then device will update the time by every 1 minute on the website. Disable GPRS
Command: S0
The device will reply "GPRS OFF".
User Guide