Related Manuals for Keep Track GPS EV07
Summary of Contents for Keep Track GPS EV07
- Page 1 User Guide 2018 User Guide 3G-GPS TRACKER WITH MOBILE, FALL AND ALERT BUTTON WWW.KEEPTRACKGPS.COM.AU | 13 GLENORCHY ROAD, SOUTHERN RIVER WA 6110 |...
-
Page 2: Product Overview
Product Overview Thank you for purchasing EV07. This device is a waterproof IPX5, innovative miniature sized 3G personal remote positioning device with built-in U-blox GPS and GSM/GPRS technology. It’s for monitoring and protecting people and property. It can be used in all walks of life from Traveling, Lone Workers and Mobile Nursing Staff, to Children and... -
Page 3: Configuration And Operation By Sms
User Guide Configuration and Operation by SMS To Set the Authorized Number It is not mandatory for all three of the authorized numbers to be set, however a minimum of one must always be set. 1. Command: A1 or A1,phone number Note: With no spaces in the text, case-insensitive. - Page 4 User Guide 3. Command: A3 or A3,phone number Note: With no spaces in the text, case-insensitive. Example: A3,123456789 * Using your mobile phone, send A3 to the phone number of the device, it will reply: ·Set mobile number 3 OK! * To delete this, number, you can send A3,0 Modify the Time zone...
-
Page 5: Location Request
User Guide Location request Reply’s with coordinates and web link Command: The device will reply “GPS Info! Time: xxxxx; Lat: xxxx; Lon: xxxx; Spd: xxxxx, Altitude:xxxx Bt: xxx maps.google.com/maps?q=loc:22.647379,114.030998 *Put coordinates to Google earth or Google maps. Click on search button, then you will find the position fixed. *Click on the link then the location can be shown directly on Google Map on your mobile phone. -
Page 6: Change Password
User Guide Command password protection Command: 123456lock After sending this command, then it will require a password in front of all commands (except reboot and RESET!). For example, 123456LOC, 123456A1 etc. (default password is 123456) Remove password protection, just simply send 123456unlock Change password: Command:... -
Page 7: Geo-Fence Alarm
User Guide GEO-Fence Alarm Command: G+X, Y, xxxM/KM Example: G1,1,1,100M Notes: No spaces in between. X=No. of Geo fence (1~3), user can set 3 Geo fences Y=0 means to turn off the function Y=1 means to turn on the function Z=1 means to set alarm when the tracker enters the preset area Z=0 means to set alarm when the tracker breaches the district is the preset distance to the tracker’s original place, must be 3 digitals. -
Page 8: Over-Speed Alert
User Guide Over-Speed alert Command: speed1,+ Speed Notes: The speed must be in km/h in 2 or 3 digitals. (01~255km/h) Example: speed1,100 Suppose the over-speed alert that we want to set is 100km/h, when the device exceeds 100km/h, it will send the message “Over-speed! +GPS Info” to all registered phone numbers. -
Page 9: Motion Alarm
User Guide Listen-in (Voice wiretapping) Command: A1, A2, A3 can make a silence call to the tracker, the track answers the call automatically and allows the caller to hear what is happening around the tracker. There is no voice indication that the call is in progress. To turn off this function, please send to the device. -
Page 10: Fall Detection
User Guide AGPS Command: AGPS1, latitude, longitude Example: AGPS1,22.647606,114.022583 Assisted GPS (abbreviated generally as A-GPS and less commonly as AGPS) is a system that is often able to significantly improve the startup performance or time-to-first-fix (TTFF) and improve the GPS location to be more precise, of a GPS satellite-based positioning system. To turn off this function, please send AGPS0 Very important: to be able to use AGPS function, user also need to set APN, but GPRS can be off. -
Page 11: Check Settings
User Guide Outgoing Call control Command: CALL1 With this command, all registered numbers can receive a call from the device if the SOS alarm or fall alarm is activated. Command: CALL0 With this command, all registered numbers will not receive a call from the device if the SOS alarm or fall alarm is activated. Disable SMS alarm Command: SMS0... -
Page 12: Reboot Device
User Guide Reboot device Command: reboot The device will restart itself without changing any settings. Initialization: Command: RESET! Note: This is to make all settings back to the factory default. Device 5 working modes Live Tracking Mode (1) Command: In this mode, Both GSM and GPS chip are always working, Battery can last 18~24 hours. Smart Power Saving Mode (2) (default working mode) Command: In this mode, GPS chip is off when there is no movement or no phone usage/alarm/SMS. - Page 13 User Guide Deep Sleeping Mode (3) Command: DS1 or DS1,xxM/H Both GSM and GPS chip will be off to save power, the device is unable to receive calls or SMS. It can be only activated by movement. Once movement is detected, it will run for the set time and sleep again if no movement is detected. Battery can last 40 days if no movement at all.
-
Page 14: Gprs Setting
User Guide GPRS Setting To use the GPRS function, the user needs to setup the APN by sending SMS command. --What is APN? Access point name (APN) is the name used to identify a general packet radio service (GPRS) bearer service in the GSM mobile network. The APN defines the type of service that is provided in the packet data connection. - Page 15 User Guide Reconnect GPRS Reconnect the website via GPRS for real time tracking, please send Built-in Memory The device built in 8MB flash memory inside. It will store the GPS information when do not have GSM network coverage (i.e., very low population density areas, some mountainous terrain, underground areas etc).
- Page 16 - 0 -...