Table of Contents
Advertisement
4. Adjusting the call volume
To increase or decrease the volume of your alarm, you can use the side
5. Make a Phone Call /Speed Dial
Hold down the Call Button for 2 seconds, the screen will show your list of contacts. Scroll down by
pressing the Power Button. Scroll up by pressing the Call Button again to highlight the required
number then press the SOS Button to make the call. When activated it will show on the screen for
example 'Call out Hazel'. (who ever your contract name is)
To hang up on the call, simply press the
6. Receiving Incoming calls
Your alarm will automatically answer any incoming phone call after ringing once. If you want to
change this setting to answer at your will then contact us for assistance to reprogram the Alarm.
7. Fall Detection
In the event the alarm senses a fall, an emergency fall sequence will then be initiated. First the alarm
will vibrate and then display "fall" on the screen, If not canceled after 15 seconds it will then send a
"fallen" text message to all contacts, then call your 1
situation and provide your location.
If your 1
Emergency Contact does not answer it will then call the next person on the list.
st
The sensitivity of the Fall Detection can be adjusted, follow the Command Instructions.
Useful information: If you have accidently activated a Fall Alarm, a short press and release of the
SOS button will cancel it.
Call Button & Volume +
Power Button & Volume - / Contact Down
SOS button firmly and quickly.
st
Emergency Contact to alert them of your
4
4G Personal Alarm
User Guide
buttons.
/
Contact up
Advertisement
Table of Contents
