Table of Contents
Advertisement
Balco WaterJet
Inhalation
Vapors from printing materials can be irritating to the respiratory system. If respiratory irritation occurs:
• Expose the victim to fresh air immediately.
• Seek medical attention immediately.
• Keep the patient warm but not hot.
• Never feed anything by mouth to an unconscious person.
• Oxygen should be administered by authorized personnel only.
• If the victim has stopped breathing, perform artificial respiration or cardiopulmonary resuscitation.
Waste Disposal
Fully cured models present no special safety or health-related issues. However, check if local regulations
regard cured and partially cured resins as hazardous industrial waste, and comply with all applicable
regulations governing their disposal.
Safety
8
Advertisement
Table of Contents
