Introduction; Balco Waterjet; For More Information; Terms Used In This Guide - Stratasys Balco WaterJet Installation And User Manual

Balco WaterJet

Introduction

Balco WaterJet
The Balco WaterJet provides easy and fast cleaning of support material from models printed on Stratasys
3D printing systems. The WaterJet comes equipped with two types of nozzles, enabling you to choose
the flow rate and pressure suitable for cleaning, both delicate and robust models.
This user guide provides instructions for installing, operating and maintaining the following Balco
WaterJet systems:
• OBJ-01007: 220 V WaterJet—Standard Size
• OBJ-03007: 220 V WaterJet—Large Body
• OBJ-01012: 110 V WaterJet—BOD/COD Standard Size
• OBJ-03008: 110 V WaterJet—BOD/COD Large Body
• OBJ-01006: 110 V WaterJet—Standard Size
• OBJ-03006: 110 V WaterJet—Large Body
For More Information
http://www.stratasys.com
Visit
methods.
If you have any questions about the information presented in this document, or if you have any comments
or suggestions for future editions, please send a message to c-support@stratasys.com.
Terms Used in This Guide
Resin
Model material
Support material
Jet nozzle
Spray nozzle
for information on Stratasys, its technologies, products, and application
The base substance from which photopolymer printing
materials are made for use in Stratasys PolyJet printers.
Material used for building models.
Material used for supporting the structure of models during
production. This material is later removed with the WaterJet.
High-pressure nozzle for removing Support material.
Medium-pressure nozzle for removing Support material.
Introduction
5