Troubleshooting; Soft Reset; Reset To Factory Settings; Faq - Cardo Systems Freecom 4x Manual

6. TROUBLESHOOTING

6.1 SOFT RESET

If your FREECOM 2x stops responding, reset it in one of these ways:
Turning it off and then on again (see Switching Your Unit On/Off).
●
Using the supplied USB cable, connect your unit to the computer or wall charger for 30 seconds.
●

6.2 RESET TO FACTORY SETTINGS

This option deletes all paired units, devices and all configuration settings.
To perform a factory reset through the unit:
1. Check that your FREECOM 2x is in Standby mode.
2. Simultaneously press
The LED flashes purple 5 times slowly, confirming that pairing has been reset.

6.3 FAQ

Additional answers to common problems can be found at
+ + for 5 seconds.
19
www.cardosystems.com/support/freecom-2x/