Table of Contents
Advertisement
6. TROUBLESHOOTING
6.1 SOFT RESET
If your FREECOM 1 stops responding, reset it by either:
Turning it off and then on again (see
●
Using the supplied USB cable, connect your computer or wall charger to the FREECOM 1 USB port for
●
30 seconds.
6.2 RESET PAIRING
This option deletes all paired devices.
To reset pairing:
Press
and
●
6.3 RESET TO FACTORY SETTINGS
This option deletes all paired devices and all configuration settings.
To perform a factory reset:
1. Check that your FREECOM 1 is in Standby (see
18).
2. Simultaneously press
turns off.
6.4 FAQ
Additional answers to common problems can be found at www.cardosystems.com/faqs.
Switching Your Unit On/Off
for 5 seconds. The LED flashes purple slowly five times, then the unit turns off.
+
+
for 5 seconds. The LED flashes purple slowly five times, then the unit
on page 6).
FREECOM 1 Modes and Events - LED Indications
15
on page
Advertisement
Table of Contents
Need help?
Do you have a question about the Freecom 1 and is the answer not in the manual?
Questions and answers