Table of Contents
Advertisement
50/78
––
10 User Interface
Overview
––
Graphic Display Module (GDM)
The primary user interface for configuration of the SureWave SFC is via the Graphic Display Mod-
ule (GDM) which is mounted on the door of the PE120-U1 enclosure. The HMI contained in it al-
lows local control of the SureWave SFC showing the system status, providing access to the oper-
ating parameters, and event history.
The HMI has different screens and menus. The user can switch between them using the naviga-
tion buttons appearing on the left side of the GDM screen. On the right side of the GDM screen,
the user can view product's main information (product number, access level, language, etc.) and
the current system status bar. The Start/Stop and Reset buttons are also placed at the bottom
righthand corner of the GDM screen.
The navigation buttons are always observable on the left side of the GDM screen. While the
product information, control buttons and the status bar are always visible on the right side of
the screen and on all pages.
1
SUREWAVE SFC USER MANUAL
Figure 10-1: GDM screen
2
3
4
Advertisement
Table of Contents
