Troubleshooting - D-Link DSL-2540U Quick Installation Manual

Adsl2+ 4-port ethernet router

Hide thumbs Also See for DSL-2540U:

Available languages

TROUBLESHOOTING

SET-UP AND CONFIGURATION PROBLEMS

1. HOW DO I CONFIGURE MY DSL-2540U ROUTER WITHOUT THE CD?

- Connect your PC to the router using an Ethernet cable.

- Open a web browser and enter the address http://192.168.1.1

- The default username is admin. The default password is admin.

- If you have changed the password and can not remember it, you will need to reset the router to

set the password back to admin.

2. HOW DO I RESET MY DSL-2540U ROUTER TO FACTORY DEFAULT SETTINGS?

- Ensure the router is powered on.

- Press and hold the reset button on the rear of the device for 10 seconds.

Note: Resetting the router to factory default will erase the current configuration settings. To re-

configure your settings, log into the router as outlined in question 1, then run the Setup Wizard.

3. WHY CAN I NOT GET AN INTERNET CONNECTION?

For ADSL users please contact your ISP to make sure the service has been enabled/connected

by your ISP and that your ISP username and password is correct.

DSL-2540U

Table of Contents