Table of Contents
Advertisement
Email Notification Setup
Email notification is strictly for convenience use only. Avoid relying on this feature for life critical
events. It is not certified agency compliant applications and may fail at any time without notice.
1. Add an email address (The email address in which the notification will generate from): Press Setup > E-Mail > User SMTP.
2. Enter The E-Mail Server Name, E-Mail ID, Password, E-Mail Server, and SMTP PortNum.
3. Press Save > Back.
4. Choose Event 1-4.
5. Select the event and trigger in which the notification is to be sent. The options are "Security," "Zones," "Thermostat," "Door
Lock," "Garage Door," "Water Valve," and "Recording."
6. Press E-Mail Address and enter up to four email addresses.
Example: Configure an email for Security Arming Away/Disarm/Alarm, Door locked/Unlocked, Recording on an established
event (set in scenes in "Camera Setup," and "Scenes").
1. Press the check box next to Security, Door Lock, and Recording.
2. Press Security then the check boxes next to Disarm, Away Secured, and Alarm.
3. Press Door Lock, and then from the drop down list press the door lock. (NOTE: To send emails for additional locks, another
event must be created (total events are four). Press the check box next to Locked and Unlocked.
4. Press Recording and check the box next to On Event Recording.
5. Press Save.
IP Setup – Set the IP Address
The keypads IP Address is used on a standard web browser to control user functions such as security, Z-Wave operation, and
camera viewing.
1. Press Setup > IP and press the type of network connection: LAN ON or WIFI ON.
a. For LAN ON (default selection): Connect an Ethernet cable between the router and the controller; the IP address and
default gateway address of the router is displayed.
- If the IP address is not displayed, change the "Internet Connection Type" to Static and manually enter the necessary IP
information from your router. Press Save when done.
b. For WIFI ON: Press WIFI ON > Press the desired WIFI router from the list > Enter the Passphrase/Shared Key (if
applicable).
Notes:
• If the Wi-Fi router's SSID is not broadcasted, scroll to the bottom of the list > Press Add Network > SSID and if applicable,
the Security Mode/Passphrase/Shared Key > Save when done.
• Pressing "Save" after changing the port number resets the controller.
• To view connectivity, press System Information.
• If left inactive, Web connections disconnect after 10 minutes.
2. Select Account Setup to create a browser log-on page for each user (for higher security) when viewing from a web enabled
device or PC on a different sub-net. Enter the required information for each field; Press Save when done.
Any device with a browser connected to the same network as the Tuxedo, can access the webserver.
This does not require authentication (Username and Password). If this authentication is desired, check
the Authentication for Web Server Local Access in "Account Login", which can control who has
access to connect. Unchecking the box leaves the Web Server open for anyone to connect.
How to Send Emergency Messages
An emergency message for fire, panic, or medical can be sent to the central monitoring station from the Emergency screen.
Press PANIC (located in the lower right corner of the screen) and hold the associated alarm icon for at least 2 seconds.
FIRE
In Case of Fire Alarm
1. A FIRE message appears at your controller and remains on until you silence the alarm.
2. Should you become aware of a fire emergency before your detectors sense the problem, go to your nearest controller and manually
initiate an alarm by pressing the panic key assigned as FIRE emergency (if programmed by the installer) and hold down for at least 2
seconds.
3. Evacuate all occupants from the premises.
4. If flames and/or smoke are present, leave the premises and notify your local Fire Department immediately.
Silencing and Clearing a Fire/Carbon Monoxide Alarm
1. Silence, acknowledge, and clear the alarm by:
a. For Residential Systems: Press Touch here to Silence on the display to silence the alarm.
PANIC
SILENT PANIC
- 5 -
MEDICAL
Advertisement
Table of Contents
