Advertisement
10. Key Functions :
KEY
Increment the value of selected
parameters.
Inrement
Decrement the value of selected
Decrement
parameters.
Scrolling to the next parameter in
EDIT mode
Forward
Backward
11. Meter Measurement Scrolling :
Display can be set as auto scroll/Manual scroll Scrolling mode can be
changes from auto to manual & ice versa by long press (Maxi than 3 sec) of
increment key.
In auto scroll the measurement display changes to next page automatically
while in manual mode (scroll) measurement page can be selected by
pressing forward & backward keys.
12. KVA Measurement Method :
3d
Recommended method of measurement in case of distorted/
unbalance load condition.
Arthematic
Conventional method of measurement.
13. Trip function :
Trip function enables the used to have reading of selected cumulative
measurement between any two selected time. Please refer 14.5 for
resetting the trip reading.
14 . Setting/Configuration Modes :
14.1 EDIT Mode :
This mode is password protected. Set values can be changed in this mode
(Editable setting are indicated in table 15.1 along-with setting range)
Installation Guide
In EDIT Mode
-----------
In Measurement Mode
Long push (for 3sec approx
for Scroll ON/OFF
-----------
Scrolling between different
measurements parameters.
Scrolling between different
measurements parameters.
Page-7
Advertisement
