Standard Furniture 13916 Assembly Instruction

STANDARD
Read instruction carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment.
Remove all components from pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish.
Identify and count all parts as specified below.
It is recommended to use two person during the assembly process.
HARDWARE LIST:
No. Description
A Hex Nut
B Allen Bolt
C Lock Washer
D Flat Washer
E Allen Key
F Wrench
1
Step 1: Attach Table Leg (3) to the apron of Table Top (1) by
using Flat Washer (D), Lock Washer (C), Hex Nut (A) with
Wrench (F). Do not fully tighten.
Sketch Size
5
16 '' x 12mm 8 pcs
1
4 '' x 50mm
5
16 '' x 13mm 12 pcs
5
16 '' x 19mm 12 pcs
4 mm
12 mm
3
D
C
A
Qty' No. Description
1 Table Top
4 pcs
2 Bottom Shelf
1 pc
3 Table Leg
1 pc
3
F
1
Step 2: Insert the Bottom Shelf (2) to the Table Leg (3).
Assemble the Shelf to Table leg by using Flat washer (D),
Lock Washer (C) and Allen Bolt (B) with Allen Key (E) .
Step 3:
Hex Nuts, assembly product is now completed.
PART LIST:
Sketch
3
2
Cleaning instructions: Clean using soft cloth
Qty'
1 pc
1 pc
4 pcs
D
C
B
E
Tighten all Bolts and
Made in Vietnam