ONNLINE CGS927 Instruction Manual page 5

Step 12
4. Safety note:
 The luminaire must be installed by qualified professionals.
 Do not use the luminaire if there is any crack or damage.
Do not install the luminaire too close to any flammable surfaces.

 The distance between the luminaire and lighting surface must be more than 0.5m.
 Repairs should only be carried out by qualified person and using genuine spare parts. Inappropriate repairing
could cause significant danger.
 Before installation or maintenance the electrical supply to the product must be isolated.
WARNING:
Risk of fire or electric shock. Do not alter, relocate, or remove wiring, or any other electrical
component. If necessary, contact a qualified electrician for assistance.
Always disconnect power for your safety when performing the luminaire modification steps below!
In some cases, it may be necessary to test the power feed with the power connected. Only
connect the power when doing the testing, then disconnect the power from the luminaire when
performing the steps below.
ONNINEN cannot and will not be liable for any modifications or results of modifications to electrical devices or
luminaires.
These instructions are provided as a reference. By using the included instructions, you are solely responsible
for following all applicable electrical safety procedures, codes, methods, and materials. If you are unsure
about any electrical modification or installation, please consult a licensed electrician or electrical contractor in
your area.
Step 13
5