Download Print this page

Kogan CERTA CT20V2BCHSA User Manual page 11

Powerplus 2 x 20v brushless chainsaw (skin only)

Advertisement

1.
Avoiding kickback
Kickback may occur if the tip of the guide bar touches an object or if the wood bends and
the saw chain become stuck in the cut. In some cases, contact with the tip of the bar may
result in an unexpected rearward reaction by hitting the guide bar upwards and in the
direction of the operator.
Jamming the saw chain at the top of the guide bar can quickly push the bar back in the
operator's direction.
Any of these reactions can cause you to lose control of the saw and potentially seriously
injure yourself.
Do not rely solely on the safety devices built into the chainsaw. As a chainsaw user, you
should take various measures to avoid accidents and injuries.
A kickback is the result of incorrect or faulty use of the power tool. It can be prevented by
taking appropriate precautions as described below:
a)
Hold the saw firmly with hands, thumb and finger enclosing the handles of the
chainsaw. Bring your body and arms into a position where you can withstand the
recoil forces. If appropriate measures are taken, the operator can control the recoil
forces. Never release the chainsaw.
b)
Avoid abnormal posture and do not saw above shoulder height. This will prevent
accidental contact with the bar tip and allow better control of the chainsaw in
unexpected situations.
c)
Always use replacement bars and saw chains specified by Kogan.com. Incorrect
replacement bars and saw chains can cause the chain to tear and/or kickback.
d)
Follow the instructions for sharpening and maintaining the saw chain. Depth
limiters that are too low increase the tendency to kickback.
Note:
Observe the safety and operating instructions in the separate operating instructions for
the battery and charger.
WARNING:
operation. This field may affect active or passive medical implants under
certain circumstances.
To reduce the risk of serious or fatal injury, it is recommended that persons
with medical implants consult their physician and the manufacturer of the
medical implant before operating the machine.
This power tool generates an electromagnetic field during

Advertisement

loading