Advertisement
INSTRUCTION
Note:
•
Read all safety warnings, instructions and specifications provided with this
tool.
•
Failure to follow all instructions listed below may result in injury.
a)
With the saw running, keep all parts of the body away from the saw chain. Before
starting the saw, make sure that the saw chain does not touch anything. When
working with a chainsaw, a moment of carelessness may cause clothing or body
parts to be caught by the saw chain.
b)
Always hold the chainsaw with your right hand on the rear handle and your left
hand on the front handle. Holding the chainsaw in the reverse working position
increases the risk of injury and must not be done.
c)
The power tool may only be held on the insulated grip surfaces in case the saw
chain touches covered cables. Saw chains touching a live wire will energise metal
parts of the power tool and could cause an electric shock to the operator.
d)
Wear eye and ear protection. Additional protective equipment for head, hands,
legs and feet is recommended. Suitable protective clothing reduces the risk of
injury from flying debris and accidental contact with the saw chain.
e)
Do not work on a tree with the chainsaw. Operation on a tree may result in injury.
f)
Always make sure you stand firmly and use the chainsaw only if you stand on firm,
safe and level ground. Slippery ground or unstable surfaces such as a ladder can
lead to loss of balance or control over the chainsaw.
g)
When cutting a live branch, expect it to spring back. If the tension in the wood
fibres is released, the tensioned branch may hit the operator and/or rip the
chainsaw out of control.
h)
Be particularly careful when cutting undergrowth and young trees. The thin
material may get caught in the saw chain and hit you or upset your balance.
i)
Carry the chainsaw by the front handle when switched off, with the chain facing
away from your body. Always remove the protective cover when transporting or
storing the chainsaw. Careful handling of the chainsaw reduces the likelihood of
accidental contact with the running chain.
j)
Follow instructions for lubrication, chain tension and changing accessories. An
improperly tensioned or lubricated chain can either break or increase the risk of
recoil.
k)
Keep handles dry, clean and free of oil and grease. Greasy, oily handles are slippery
and cause loss of control.
l)
Only saw wood. Do not use the chainsaw for work for which it is not intended. Do
not use the chainsaw to saw plastic, masonry or construction materials that are
not made of wood. Using the chainsaw for work other than that for which it was
intended can lead to dangerous situations.
Advertisement
