Advertisement
INSTRUCTION
Mounting a smartphone
Adjust balance
If the smartphone does not stay levelled when mounted:
1.
Loosen the roll balance knob.
2.
Make small adjustments by sliding the horizontal arm until the phone balances.
3.
Tighten the thumbscrew after the phone is well balanced and level to ensure
normal operation.
Note:
Proper adjustment of balance ensures better power saving during operation. The
stabiliser may still function well when the gravity centre is not properly configured,
however, it may lead to more power consumption on the motors and can greatly
affect the torque output.
Place the
smartphone into
mounting clip as
shown. Slide the
smartphone to the
right until it touches
the tilt motor.
Advertisement
