Table of Contents
Advertisement
Installing and Fixing the Heater
1.
Remove the wall brackets and expansion screws from the packaging and then fix
the screws to the wall according to the distances between the holes of the wall
brackets, as shown in the image below.
Hook
Hook
2.
Aim the 4 holes in the back of the heater to the 4 hooks on the wall bracket and
push it on, then slide them into the slots to click on, as shown in the image below.
3.
Fix the wall bracket lock piece onto the bracket with screws, slide the lock piece into
the locking slot on the back of the heater and then tighten the screw, as shown in
the image below.
Wall Bracket
Lock Piece
Expansion Screw
Expansion Screw
Advertisement
Table of Contents
