Table of Contents
Advertisement
ASSEMBLY
Free Standing
1.
Attach the two plastic feet to the bottom of the heater and then fasten the feet to
the heater using a screwdriver and the provided screws. Each foot should be
secured with 4 screws.
2.
Be sure to place the heater on a flat, stable surface.
Wall Mounting
Finding a suitable location
1.
The device must be installed so that airflow is not obstructed. The wall mounting
should be performed by a qualified person to avoid hazards.
2.
The minimum distances between the device and ceilings, ground and sidewalls, as
shown to the right, must be maintained.
Min. 30cm
Min. 60cm
Min. 30cm
Min. 60cm
Advertisement
Table of Contents
