Table of Contents
Advertisement
Quick Links
MODEL 20625
20V CORDLESS
CIRCULAR SAW
Instruction Manual
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-800-232-1195 (M-F 8AM-5PM CST)
TECHSUPPORT@WENPRODUCTS.COM
IMPORTANT: Your new tool has been engineered and manufactured to WEN's highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
WENPRODUCTS.COM
For replacement parts and the most up-to-date instruction manuals, visit
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wen 20625
Summary of Contents for Wen 20625
- Page 1 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
-
Page 2: Table Of Contents
CONTENTS WELCOME Introduction ..................... 3 Specifications ....................3 SAFETY General Safety Rules ..................4 Circular Saw Safety Warnings ................6 Electrical Information ..................8 Battery & Charger Safety Warnings ..............9 BEFORE OPERATING Unpacking & Packing List ................11 Know Your Circular Saw................. 12 Assembly &... -
Page 3: Introduction
49120B. Contact WEN customer service at 1-800-232-1195, M-F with questions. WEN plans to continue to add more items to our 20V line. For an up-to-date list of the 20V cordless tools com- patible with the included battery and charger, visit wenproducts.com and search model number 20202 (2Ah) or... -
Page 4: General Safety Rules
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 5 GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
-
Page 6: Circular Saw Safety Warnings
CIRCULAR SAW SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. CIRCULAR SAW SAFETY • Always ensure that the lower guard is covering the 1. Work environment. Do not operate the tool in wet blade before placing the saw down on a bench or floor. - Page 7 CIRCULAR SAW SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. CIRCULAR SAW SAFETY • Support large panels to minimize the risk of blade 9. During the cut. Keep hands away from the cutting pinching and kickback.
-
Page 8: Electrical Information
ELECTRICAL INFORMATION (CHARGER) DOUBLE-INSULATED CHARGER The charger’s electrical system is double-insulated where two systems of insulation are provided. This eliminates the need for the usual three-wire grounded power cord. Double-insulated tools do not need to be grounded, nor should a means for grounding be added to the product. All exposed metal parts are isolated from the internal metal components with protecting insulation. -
Page 9: Battery & Charger Safety Warnings
Never carry the charger by its cord or yank it by the cord battery chemicals. If the battery or charger are damaged, to disconnect it from the receptacle. Keep the cord away call WEN customer service at 1-800-232-1195 for as- from heat, oil and sharp edges. Make sure the cord will sistance. - Page 10 BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time. 2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently. 3.
-
Page 11: Unpacking & Packing List
UNPACKING & PACKING LIST UNPACKING Carefully remove the circular saw from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories. -
Page 12: Know Your Circular Saw
TOOL PURPOSE Easily make miter cuts and rough cuts on large sheets of material with your WEN Circular Saw. Refer to the follow- ing diagrams to become familiarized with all the parts and controls of your circular saw. The components will be referred to later in the manual for assembly and operation instructions. -
Page 13: Assembly & Adjustments
ASSEMBLY & ADJUSTMENTS WARNING! To avoid injury from accidental startups, be sure that the tool is switched off and disconnected from the power supply before inspecting the unit, making adjustments, or changing accessories. SETTING THE DEPTH OF CUT Before making a cut, it is important to set the correct blade depth. The saw’s maximum cutting depth at the 90° set- ting is 2-1/6 inches (55mm) and 1-3/5 inches (40mm) at the 45°... - Page 14 ASSEMBLY & ADJUSTMENTS LINE-OF-CUT INDICATORS Fig. 4 A line-of-cut indicator notch (Fig. 4 - 1) can be found at the front of the saw base. This notch helps provide indication of where the cut will be occurring. NOTE: Since blade thicknesses vary, it is necessary to make test cuts along a guideline in scrap material to determine the proper alignment of the guide- line within the notch.
-
Page 15: Operation
OPERATION WARNING! To prevent serious injury, make sure all the instructions have been read and understood before operating this tool. Before connecting the tool to its power source, always check to see that the tool is turned OFF. Accidently starting the saw could result in injury. TYPES OF CUTS •... - Page 16 OPERATION OPERATING THE SAW 1. Hold the tool firmly with both hands, using both the front handle and rear handle. Avoid placing your hand on the workpiece while making a cut. If both hands are holding the saw, they cannot be cut by the blade. 2.
- Page 17 OPERATION MAKING PLUNGE CUTS/POCKET CUTS A plunge cut is a cut that must be made inside the area of the workpiece rather than starting from an outside edge and working inward. Plunge cuts can be very dangerous for the novice to attempt because of the need to manually retract the lower guard and perform a plunge cut which is potentially hazardous.
-
Page 18: Maintenance
MAINTENANCE WARNING! To avoid injury from accidental startups, be sure that the tool is switched off and disconnected from the power supply before inspecting the unit, making adjustments or changing accessories. REPLACING THE SAW BLADE The quality of the cut depends on the condition of the saw blade. Never use a dull, rusty, or damaged blade. Before operation, check the blade and replace if the blade is worn-out or damaged. - Page 19 WARNING! Any attempt to repair or replace electrical parts on this tool may be hazardous. Servicing of the tool must be performed by a qualified technician. When servicing, use only identical WEN replacement parts. Use of other parts may be hazardous or induce product failure.
-
Page 20: Exploded View & Parts List
EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty. - Page 21 EXPLODED VIEW & PARTS LIST Part No. Description Qty. Part No. Description Qty. Hex Screw, M6x15 20625-029 Washer, 6mm 20625-001 (LH) 20625-030 Rivet 20625-002 Washer 20625-031 Nut, M6 20625-003 Outer Flange 20625-032 Depth Guide 20625B Blade 20625-033 Bolt, M6x80 20625-005...
-
Page 22: Warranty Statement
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use. - Page 23 NOTES...
- Page 24 THANKS FOR REMEMBERING V. 2021.03.30...
Need help?
Do you have a question about the 20625 and is the answer not in the manual?
Questions and answers