Trivisio Colibri-Wireless User Manual page 5

2.Status LED
Displays the status of the tracker.
LED colour is battery state:
Green: (when connected to USB): tracker is on and fully charged.
Green: (when NOT connected to USB): tracker is on.
Orange: tracker is charging.
Red: battery is low.
LED flashing is tracker's mode:
Steady: tracker is in stand-by mode.
Slow flashing: tracker is in measuring mode.
Fast flashing: tracker is in scanning mode.
3.Serial Number
The serial number is unique to each individual tracker. The serial number is important in establishing
a connection between the USB dongle and the tracker.
4.Reset hole
To reset the tracker, insert a straightened paper clip into the reset hole.
5.Micro USB connector
To charge the tracker and to update firmware.
It takes two hours to charge the battery completely.
Colibri Wireless User Manual 5