1.1
Inteded Use
The product is designed to measure inertial movements and to transfer acceleration, angular rate
and magnetic field via a wireless dongle to a PC. Power is supplied by a lithium polymer battery.
1.2
Advice
To ensure the correct position of the device during the measurement session, make sure that the
tracker is securely attached to object or body being measured.
1.3
Warning for Electrical Products
Avoid using or storing the devices at wet, humid, dusty and smoky surroundings or extreme
temperatures.
Do not use devices at temperatures below 0°C or above +55C.
Always switch off and unplug the Colibri and the dongle if not in use.
In case of damage contact your retailer. There are no user serviceable parts. Only qualified service
personnel should perform any service required on this product.
Colibri Wireless User Manual
3
Need help?
Do you have a question about the Colibri-Wireless and is the answer not in the manual?