Labeling And Packaging - 3scort SOKOL-M1 Operating Manual

5

Labeling and packaging.

5.1 Marking
The marking «SOKOL-M1» shall contain inscriptions and designations that meet the
5.1.1
requirements of GOST 2930-62, GOST 26828 and design documentation.
The marking shall ensure a clear and clear image during the service life of «SOKOL-
5.1.2
M1».
5.1.3 "SOKOL-M1" marking is performed by means of self-adhesive label or engraving on
the body surface and contains the following information:
—
name and location of the manufacturer;
—
name of the product;
—
modification of the product;
—
designation of Tech specs;
—
factory number of the product;
—
date of manufacture.
5.1.4 The label is placed on the bottom of the case.
5.1.5 Labelling of transport containers shall comply with GOST 14192-96 and contain basic
and additional information inscriptions, drawn in accordance with the drawings of the manufacturer:
trademark of the manufacturer, name and symbol, serial number according to the numbering system of
the manufacturer, date of packing.
5.1.6 Sealing "Sokol-M1" from unauthorized access is made by metallized seals in
accordance with the requirements of GOST 18680-73.
5.1.7 The place for sealing is chosen according to the figure. 3.
5.1.8 Automatic meteorological stations "SOKOL-M1" received by the Technical Control
Department (TCC) shall have the corresponding records in the section "Certificate of Acceptance" of
the document "Automatic meteorological station "SOKOL-M1", passport MS1.41631.002PS.
Figure 3 - Scheme of sealing of "SOKOL-M1" products,
where "1" is the place where the seal is applied.
13