Underwater White Balance - Sony DSC-WX1 Cyber-shot&reg Handbook

Underwater White Balance

Adjusts the color tone when the camera is set to
movies.
1 MENU t (Underwater White Balance) t desired mode
(Auto)
(Underwater 1) Adjusts for underwater conditions where blue is strong.
(Underwater 2) Adjusts for underwater conditions where green is strong.
(One Push)
(One Push
Set)
Notes
• Depending on the color of the water, the Underwater White Balance may not work correctly even though
you select [Underwater 1] or [Underwater 2].
• When flash is [On] the underwater white balance can only be adjusted to [Auto], [One Push], or [One
Push Set].
• [One Push Set] is unable to be selected while charging the flash.
• The white references loaded using [White Balance] and [Underwater White Balance] are stored
separately.
Automatically adjusts color tones underwater so they appear
natural.
Adjusts the white balance depending on the light source. The white
color memorized in [One Push Set] mode becomes the basic white
color. Use this mode when [Auto] or other modes cannot be set the
color properly.
Memorizes the basic white color which will be used in [One Push]
mode (page 52).
(Underwater) mode or (Underwater) for
53 GB