Table of Contents
Advertisement
Adjusting oven temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is
cooking too hot or too cool for your recipe times, you can
adjust the control so the oven cooks hotter or cooler than
the temperature displayed.
The oven temperature my be increased +35°F (+19°C) or
decreased -35°F (-19°C) from the factory settings.
Example: increase the oven temperature by 30°F:
Step
1. Press and hold bake
for 6 seconds.
2. Enter 30.
3. Press start.
Example: decrease the oven temperature by 30°F:
Step
1. Press and hold bake
for 6 seconds.
2. Enter 30.
3. Press self-clean.
4. Press start.
NOTES
Oven temperature adjustments made will not affect the
broil or self-cleaning feature temperatures.
If the temperature shows an adjustment of -30°F, and
a +30°F adjustment is needed, you can toggle between
the (-) or (+) in the display by pressing self clean.
Do not use oven thermometers such as those found in
a grocery store to check temperature settings inside
your oven. These oven thermometers may vary as
much as 20 to 40°F from actual temperatures.
Operating the oven light
The interior oven light will automatically turn ON when the
oven door is opened.
Press
whenever the oven door is closed.
The interior oven light is located at the upper left rear wall
of the oven interior and is covered with a glass shield held
by a wire holder. The glass shield must be in place
whenever the oven is in use.
Press
To change the interior oven light, see "Changing the oven
light" in the Care & Cleaning section.
Press
SETTING OVEN CONTROLS
to turn the interior oven light ON and OFF
21
Advertisement
Table of Contents
