Honda CRF150RB Manual page 47

20210720082851_32KSE8110_eng_BOOK Page 47 Tuesday, July 20 2021 08:31:26 JST
Caring for Your Vehicle
Do not use wax or polishing compounds on
●
mat painted surfaces:
Use a soft cloth or sponge, plenty of
u
water, and a mild detergent to clean mat
painted surfaces. Dry with a soft clean
cloth.
Condensation Control
Some condensation can form within the
transmission cavity as well. This is natural and
just one more reason you should change the
engine and transmission oil often.
Aluminium Components
Aluminium will corrode from contact with dirt,
mud, or road salt. Clean aluminium parts
regularly and follow these guidelines to avoid
scratches:
Do not use stiff brushes, steel wool, or
●
cleaners containing abrasives.
42
Exhaust Pipe and Muffler
The exhaust pipe and muffler are stainless steel
but may become stained by mud or dust.
To remove mud or dust, use a wet sponge and
a liquid kitchen abrasive, then rinse well with
clean water. Dry with chamois or a soft towel.
If necessary, remove heat stains by using a
commercially available fine texture compound.
Then, rinse by the same manner as removing
mud or dust.
NOTICE
Even though the exhaust is made of stainless
steel, it can become stained. Remove all marks
and blemishes as soon as they are noticed.