JVC KD-BT22 Instructions Manual page 37

Bluetooth operations
General
• While driving, do not perform complicated operation
such as dialing the numbers, using phone book, etc.
When you perform these operations, stop your car in
a safe place.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the
device.
• Some operations and display information may be
different according to the connected phone.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on the
circumstances around you.
• When the unit is turned off, the device is
disconnected.
Icons for phone types
These icons indicate the
phone type of number
entries in the Phonebook
: Cellular phone
: Household phone
: Office
: General
: Other than above
: Unknown
Warning messages for Bluetooth operations
• Connection Error:
The device is registered but the connection has failed.
Use "Connect" to connect the device again. (See
page 17.)
• Error
Try the operation again. If "Error" appears again,
check if the device supports the function you have
tried.
These icons indicate the
type of connected phone/
audio devices
: Phone only
: Phone/Audio
: Audio only
• Please Wait...
The unit is preparing to use the Bluetooth function. If
the message does not disappear, turn off and turn on
the unit, then connect the device again (or reset the
unit).
• Please Reset...
Reset the unit and try the operation again. If
"Please Reset..." appears again, consult your nearest
JVC IN-CAR ENTERTAINMENT dealers.
iPod
• Controllable iPod (connected through USB cable):
– iPod nano (1st & 2nd Generation)
– iPod video (5th Generation)
• Update your iPod to the latest software version
before using it with this unit.
– You can check the software version of your iPod
under "About" in the "Setting" menu of the iPod.
– For details about updating your iPod, visit
<http://www.apple.com>.
• While the unit is being turned on, the iPod is charged
through this unit.
• While connecting an iPod with Video:
– No video shows on the iPod's display or the
external monitor (only the audio part is available).
– It is not possible to browse video files on the
"Video" menu. (If you connect the iPod during
the playback or pausing of a video file, resuming
playback will not work.)
• iPod shuffle and iPhone cannot be used with this
unit.
• You can control the iPod from this unit when "JVC" or
" " appears on the iPod display after connection.
• The song order displayed on the selection menu of
this unit may differ from that of the iPod.
• If playback is stopped, select a track from the
selection menu or press BAND to play back the same
track again.
• The text information may not be displayed correctly:
– Some characters such as accented letters cannot be
shown correctly on the display.
– Communication between the iPod and the unit is
not stable.
Continued on the next page
REFERENCES 37