Advertisement
Step Seven
Before placing the last section of pole into the end
bracket, add the C rings. If using a centre bracket ensure
that the rings are distributed evenly either side of the
centre bracket
We recommend one ring per 10cm of pole.
Step Eight
1. Loosen the pole retainer and rotate 90 degrees.
2. Place the pole into the bracket.
3. Rotate the pole retainer back 90
degrees returning into the slot and
tighten screw until the pole does
not slide in the bracket.
Step Nine
1. Position one ring between the bracket
and the finial.
2. Push the finial onto the end of the pole.
3. Tighten the retaining screw if applicable.
Step Ten
1. Equally space curtain hooks along the curtain
header, you will require one hook for every ring.
2. Place the hooks through the eyelet on the
ring.
Step Eleven
1. Test the installation by drawings the curtains
across the pole.
Safety Instructions
Only use a Step Ladder to install this product.
Do Not over reach. Always move the Step Ladder so that you are in a safe working position.
Do Not hold or lean on the track to support your weight.
We recommend you use two people for installation of larger tracks.
Take care when using power tools, use of a Residual Current Device (RCD) is recommended.
Always use eye protection when drilling.
Beware of hidden pipe runs and cables.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled
furniture.
PLEASE KEEP OUT OF THE REACH OF YOUNG CHILDREN.
SMALL PARTS - CHOKING HAZARD
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
PLEASE KEEP THE BATCH CODE ON THE PACKAGING FOR FUTURE REFERENCE IF
ANY QUERIES
John Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com
9005L/ISS4
Advertisement
