John Lewis Pole bar bay pole Manual

John Lewis
Thank you for purchasing this product. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer from
whom you bought this product.
This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
Fittings and parts checklist
c
a
Quantities Required
To fit a pole into a bay window you will need enough pole as laid out in Step 1. Three brackets,
one for each end and one centre bracket. You will aslo need the following per corner.
THE BAY POLE IS NOT SUITABLE FOR EYELET STYLE CURTAINS
a Corner Joint
b Passing Bracket
c Rings
Each Bracket is supplied with - 3x Screws - 3x Wall plugs
If ceiling fixing you must use the Top Fix Bracket.
Pole bar bay pole
b
Per Corner
1
2
Approx. 1 per 10cm of Pole