LightBug Zero User Manual page 93

1 LED – device is 0%-25% charged
2 LEDs – device is 25%-50% charged
3 LEDs – device is 50%-75% charged
4 LEDs – device is 75-100% charged
GPS signal* – this indicator shows whether GPS is
detected. It glows solid orange when operational, but
glows solid red when GPS is unavailable. It is normal for
GPS to be unavailable when the tracker is indoors.
GSM signal* – this indicator shows the GSM signal
strength. It glows solid orange when operational, but glows
solid red when GSM is unavailable. GSM may not be
available in areas with poor cell phone coverage.
*The signal indicators are for diagnostic purposes only.
1-3 Second Button Press
Pressing and holding the button for 1-3 seconds will force
a location update (this will update any pending settings,
but not affect any saved settings). The battery LEDs will
flash from left to right in a cycle, and you will hear a small
beep.
15 Second Button Press
Pressing and holding the button for 15 seconds will force a
hard reset (this will update any pending settings, but not
affect any saved
recommended
LightBug User Manual
settings).
if you are
This button
facing network
Page
press is
related
93 96
of