Step 2: Select the device mode
There are two device modes available in Easy Mode, you
will need to pick the one best suited to your use case:
1) "Long Battery Life" - which disables motion detection
and switches the device to a fixed update mode. You will
receive updates at fixed intervals, regardless of whether
the tracker has moved.
2) "Motion Tracking" - which enables motion detection on
your device. It works great if you want to receive an alert
when the tracker moves or if you need to see more refined
information about where your tracker has been.
Caution: This mode uses more power and hence will cause
a shorter battery life per charge.
Note: You will need to be on the Unlimited Data Plan to utilise
this mode.
If you decide that the "Long Battery Life" mode is best for
you, then follow the steps
directly
below. If you would
prefer the "Motion Tracking" mode,
skip to the specific
steps
for that plan.
31
96
Page
of
LightBug User Manual
Need help?
Do you have a question about the Zero and is the answer not in the manual?