Download Print this page

Advertisement

Quick Links

MANUFACTURER OF AMUSEMENT MACHINES
JAKAR, ul. Fabryczna 10, 44-240 Żory, Poland
www.jakar.pl
CRAZY COW
operator's manual

Advertisement

loading

Summary of Contents for jakar CRAZY COW

  • Page 1 MANUFACTURER OF AMUSEMENT MACHINES JAKAR, ul. Fabryczna 10, 44-240 Żory, Poland www.jakar.pl CRAZY COW operator's manual...
  • Page 2 CONTENTS INTRODUCTION TECHNICAL PARAMETERS III PRIMARY SETUP IV ADVANCED SETUP HOW TO PUT PRIZES ON PRIZE ARMS CORRECTLY VI GUARANTEE TERMS VII GUARANTEE CARD...
  • Page 3: Technical Parameters

    I INTRODUCTION CRAZY COW was designed for enjoying players in amusement parks, festivities, cinemas, clubs, bars, etc. Thsi device is made from the best art materials and parts available on the market. Components of the device are compliant with safety standards.
  • Page 4 VOLUME DEMO – use DOWN / UP buttons to set demonstration volume; VOLUME VOICE – use DOWN / UP buttons to set voice volume; VOLUME MUSIC – use DOWN / UP buttons to set music volume; VOLUME ALARM – use DOWN / UP buttons to set alarm volume; VOLUME WIN –...
  • Page 5 Values set on channels should be like this: COIN CHN1: 0,50 BANK CHN1: 5 Credits: 0,50 Credits: 6 COIN CHN2: 1 BANK CHN2: 10 Credits: 1 Credits: 12 COIN CHN3: 2 BANK CHN3: 20 Credits: 3 Credits: 25 COIN CHN4: 5 BANK CHN4: 50 Credits: 6 Credits: 62...
  • Page 6 Then, press SET button to return to factory settings; V HOW TO PUT PRIZES ON PRIZE ARMS CORRECTLY To put the prize on prize arm, 2. To make putting prizes easier, fit the unscrew the locking pin from the spiral locking pin to the prize arm and define, by turning it in a clockwise direction.
  • Page 7 4. After placing prizes reach the locking pin over hanging ties supporting prizes and screw the locking pin into the prize arm by turning it in anti-clockwise direction. 5. Pay attention to the fact, if all prizes are 6. Properly hanging prizes. hanging within a loop marked by colorful sticker.
  • Page 8 3) too close to each other (on neighbouring loops); 4) below the locking pin and on the loop, but on loops non-marked with sticker.