Advertisement
Locate: Lower Cabinet assembly. Leg(10&11),(12)1/4-20x5/8"
bolts
Tools needed: Phillips Head Screwdriver
Procedure: Turn the Lower Cabinet Assembly upside down.
Place each leg at the corner of the smoker cabinet assembly.
Fasten each leg with three 1/4-20x5/8" bolts. Turn the Lower
Cabinet assembly right side up.
Note: The right front leg contains an extra hole on its side. This
hole will be used later to secure the gas hose to the leg with a
zip-tip. Fig 1.1
Locate: Lower Cabinet assembly. Small Damper(7A), (2)10-
24x1/2" bolts, (2)10-24 hex nuts and (2) #10 washers.
Tools needed: Pliers or 3/8" & 7/16" wrench, Phillips Head
Screwdriver
Procedure: Attach the
Small
damper to the inside of the right
side of lower cabinet using (1) 10-24x1/2" bolt, (1) 10-24 hex
nut and (1)
#10
washer. Repeat for left side of lower cabinet.
Step 3
Locate: Smoke cabinet, Big Damper(7), (1)10-24x1/2"
bolt,(1)10-24 hex nut and(1)#10 washer
Tools needed: Pliers or 3/8"&7/16" Wrench,Phillips Head
Screwdriver
Attach the Big Damper(7) to the inside of the back side of
upper cabinet using (1)10-24x1/2" bolt,(1)10-24 hex nut
and(1)#10 washer. Fig 3.1.
Advertisement
