Download Print this page

American Standard LAVAMANOS Installation Instructions Manual page 6

Drop-in / wall mount lavatory
Hide thumbs Also See for LAVAMANOS:

Advertisement

9.
Conecte el sifón al ensamble del desagüe,
ajustando el montaje con la mano para
verificar su alineación. Puede que sea
necesario cortar parte del tubo (9.a) o
parte del tubo horizontal del sifón (9.b).
Asegure las uniones para tener un ensamble
hermético.
Connect trap to drain assembly hand tight
to check alignment. It may be necessary to
cut off part of the tailpiece (section 9.a) or
part of the horizontal leg of the trap (section
9.b). Secure joints for watertight assembly.
Poner un delgado cordón de silicona entre el lavamanos y la pared terminada.
Retire el exceso de silicona con el dedo.
Apply sealant between the lavatory and the finished wall. Remove the caulk's
Recomendación
excess with the finger.
Recommendation
INSTALACIÓN DEL PRODUCTO* (De sobreponer)
Product Installation* (Drop-in)
*Revise todas las normas locales de construcción y plomería.
*Observe local plumbing and building codes.
NOTA:
Verifique que el espacio bajo del mesón permita acomodar los abastos y el desague de la
grifería y el lavamanos.
NOTE:
If replacing an existing lavatory be certain to shut off water supply before removing old lavatory.
PLANTILLA DE INSTALACIÓN
Installation Template
Verificar dentro del empaque del LAVAMANOS este contenido
antes de proceder a instalar el producto.
Check inside the LAVATORY packaging this content previous of
proceed to install the product.
6
Revisar
Check

Advertisement

loading