Unpack and inspect fan carefully to be certains all are included. Motor complete set Hardware Bag Hanger Bracket Wood Screw Screw Paper Washer Blade Holder Screw Coopper Nut Wire nut Blade Balance Kit...
Page 3
Assembly and installation steps for fans. Moter & Blade Installa on 3.1 Upside the blade , Fasten Blade onto motor assembly hole using wahers & motor screws provided 1. Turn off power at breaker box to avoid possible electrical shock. from hardware bag.
Page 5
INSTUCTION: V980 Step 1 – ( Turn off the main power supply in the circuit breaker box, before commencing the installations.) 1. Make wires connec�on according to the wiring instruction in the rear page. IMPORTANT: 2. Remove the wall control front plate using a flat and small Keep antenna safely inside canopy.
Problems and Troubleshooting Troubleshooting Problems Cause 1. Connecting the power cord to the fan or connecting 1. Fan does not work. 1. Check the wiring harness for the fan. And the power cord the power cord to the fan control system. Not good in the fan control switch firmly.
Need help?
Do you have a question about the LA NEW ABS 56" and is the answer not in the manual?
Questions and answers