Connecting The Signal Generators; Connection To The Screw Terminal Panel; Fig. 1-3: Pin Assignment: 78-Pin D-Sub Female Connector (Apcie-1711 And Cpcis-1711) - Addi-Data APCIe-1711 Function Description

Function description

Fig. 1-3: Pin assignment: 78-pin D-Sub female connector (APCIe-1711 and CPCIs-1711)

FM = Function module
* Pins 52 and 72: see Technical Description of the board

1.5 Connecting the signal generators

1.5.1 Connection to the screw terminal panel

On the screw terminal panel PX8001, the pins of the 50 pin D-Sub female connector and the terminals
connected to them are numbered in the same way. Thus, the terminal assignment of the screw
terminal panel is identical with the pin assignment of the 50-pin D-Sub male connector of the
APCI-/CPCI-1710 or with that of the 50-pin D-Sub male connector on the ST1711-50 cable
(APCIe-/CPCIs-1711).
The following table is to serve as a help for you when connecting the signal generators to the screw
terminal panel. The blank fields in the "Signal generator" column can be filled in on the basis of the
selected signal generator type.
www.addi-data.com 10
Digital I/O