Additional Equipment - Jeulin ESAO 472 061 Manual

ESAO Method
Seismic captor
Ref :
472 061
Adjustment
of gain
Connector for
interface
ENGLISH
1 Introduction
The seismic sensor allows recording the wave generated by a mechanical
rupture or shock.
It operates with the VTT, ESAO Primo, Syneo interfaces.
You can use it with:
- VTT in autonomous mode
In recorder mode,
Using the VTT software supplied with the sensor.
- VTT connected to a PC
- The Primo with a scientific workshop software program
2 Description
The signal is measured in a non-real unit, corresponding to the Seismic
Wave Amplitude, SWA.

3 Additional equipment

For a simple demonstration of the impact of distance on the wave, it is
possible to use an earthquake scale model (Ref. 507 036).
9
Sensor