Parts Included In The Kit; Cabinet Or Wall Cutout; Electrical Outlet Location - Frigidaire GLMB209D Installation Instructions Manual

PARTS INCLUDED IN THE KIT

1. Front Frame Assembly - QTY 1
2. Exhaust Duct Assembly - QTY 1
3. Screw A - QTY 2
4. Screw B - QTY 4

CABINET OR WALL CUTOUT

Cutout Dimensions
Height (A)
Minimum
Maximum
Width (B)
Minimum
Maximum
Depth (C)
Minimum

ELECTRICAL OUTLET LOCATION

Outlet should NOT be in the shaded area as indicated on
Illustration 1
NOTE 1:
If the Depth (C) dimension is greater than 21" (53.3 cm),
the outlet location may be in any area on the rear wall.
NOTE 2:
The floor of the opening should be constructed of ply-
wood strong enough to suppor t the weight of the oven
and floor load (approximately 100 pounds). The floor
should be level for proper operation of the oven. Be sure
to check the local building code as it may require that the
opening be enclosed with side, ceiling and rear partition.
The proper functioning of the oven does not require the
enclosure.
Installation Instructions
3
/
16 " (42.5 cm)
4
17" (43.2 cm)
3 /
24 " (61.9 cm)
8
11 /
24 " (62.7 cm)
16
20" (50.8 cm)
Front Frame Assembly
Exhaust Duct Assembly
A
B
2
Screw A
Screw B
6"
(15.2 cm)
C
Illustration 1