Targus DEFCON SCL User Manual page 8

Notebook security notebook security serialised combination cable lock

Hide thumbs Also See for DEFCON SCL:

Available languages

Targus notebook security DEFCON

Using the DEFCON SecureSpacers

1. Insert your DEFCON SCL into the computer's lock slot.

2. Pull the DEFCON SCL away from the computer and check

whether the gap is excessive.

3. If so, try each of the SecureSpacers to determine which one fits the

gap. The SecureSpacers come in three sizes: 1.6 mm, 0.8 mm, and

0.4 mm.

NOTE: DO NOT REMOVE THE ADHESIVE STRIP FROM ANY OF THE SECURESPACERS

UNTIL YOU DECIDE WHICH ONE TO USE.

4. Once you know which SecureSpacer you are going to use, remove

the locking device from the computer. Then remove the adhesive

strip from the back of the SecureSpacer and attach the spacer to the

DEFCON SCL.

SCL serialised combination cable lock