Advertisement
Table of Contents
- 1 Parts
- 2 Hardware
- 3 STEP 1 : Insert 2 Wood Cam Pins(L) into Back Panel(LS-A).
- 4 STEP 3 : Insert 6 Wood Cam Pins(L) into the Left Side(LS-F) and Right Side(LS-G).
- 5 STEP 4 : Attach the Left Side(LS-F) and Right Side(LS-G) by Inserting and Locking Cams(Figure 1).
- 6 STEP 5A : Insert 2 Glides(P) into both Foot Bracket(LS-D).
- 7 STEP 7 : Finish by Covering All Cam Locks with Cam Caps(O) and Inserts with Insert Covers(S).
- Download this manual
Low Open Storage Cabinet • ONSC3020 • INSTRUCTIONS
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
LS-E
LS-F
LS-D
Parts :
LS-A: Back Panel
(28" x 17.25" x 1")
Quantity: 1
LS-E: Shelf
(28" x 17.75" x 1")
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
CARTONS: TT3020, PSC3020
LS-B
LS-B: Base Panel
(28" x 19" x 1")
Quantity: 1
LS-F: Left Side
(19.75" x 17" x 1")
Quantity: 1
Parts List continued on back.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
LS-D
LS-C: Top Panel
(28" x 16" x 1")
Quantity: 1
LS-G: Right Side
(19.75" x 17" x 1")
Quantity: 1
Low Open Storage Cabinet
TT-G
LS-G
LS-A
Figure 1:
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
LS-D: Foot Bracket
(19.75"D)
Quantity: 2
TT-G: Component Top
(29.5" x 19.75" x 1")
Quantity: 1
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Regency ONSC3020
Summary of Contents for Regency ONSC3020
- Page 1 Remove all wrapping materials, including staples & packing straps before you start to assemble. Do not tighten all screws/bolts until completely assembled. Keep all hardware parts out of reach of children. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 2 Panel and the cam locks on the Top Panel face the interior. LS-A LS-C LS-B LS-A STEP 3 : Insert 6 Wood Cam Pins(L) into the Left Side(LS-F) and Right Side(LS-G). LS-F LS-G Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 3 STEP 6 : Attach Component Top(TT-G) to component with 4 Top Screws(R). Then, insert 4 Shelf Pins(M) at desired height and place Shelf(LS-E). TT-G LS-E R(4) STEP 7 : Finish by covering all Cam Locks with Cam Caps(O) and Inserts with Insert Covers(S). Any problems or questions call Regency Office Furniture at 1-866-816-9822...
Need help?
Do you have a question about the ONSC3020 and is the answer not in the manual?
Questions and answers