Advertisement
Quick Links
71" Single Lateral Credenza • ONCSLF7124 • INSTRUCTIONS
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
TT-F
PED-K
PED-I
PED-J
Parts :
PED-I: Lateral
(35.5" x 23.5" x 24.5")
Quantity: 1
TT-F: Credenza Top
(71" x 23" x 1")
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
CARTONS: TT7124, MP3524, PLF3624, LG2824
PED-J: Foot Bracket
(23.5"D)
Quantity: 2
PED-K: Top Bracket
(23.5"D)
Quantity: 2
Any problems or questions call Regency Office Furniture at 1-866-816-9822
LG-D: Leg
(24.5" x 23.5" x 1")
Quantity: 1
MP-F: Modesty
(35.5" x 24.5" x 1")
Quantity: 1
71" Single Lateral Credenza
LG-F
MP-F
LG-D
LG-E
LG-E: Foot Bracket
(23.5"D)
Quantity: 1
LG-F: Top Bracket
(23.5"D)
Quantity: 1
Figure 1:
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
Page 1
Advertisement
Related Manuals for Regency ONCSLF7124
Summary of Contents for Regency ONCSLF7124
- Page 1 Remove all wrapping materials, including staples & packing straps before you start to assemble. Do not tighten all screws/bolts until completely assembled. Keep all hardware parts out of reach of children. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 2 Quantity: 8 Quantity: 1 W: Washers Quantity: 6 NOTE : PRODUCT IS REVERSIBLE. SOME STEPS INCLUDE BOTH RIGHT AND LEFT ORIENTATIONS. Please examine all parts before assembly. Hardware placement is critical. Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 3 Note: Attach the Leg(LG-D) so that the inserts for a Bridge are toward the front of the Credenza(Figure 2). Leg(LG-D) so that the inserts for a Bridge are toward the front of the Credenza LG-D O(3) O(3) Figure 2 Bridge Inserts Bridge Inserts TT-F Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 4 STEP 5 : Lateral Component is Reversible. Decide on an orientation(Left and Right). According to the orientation that you choose, remove 2 Cam Pin Covers in the location shown below. Then insert a Fine threaded Cam Pin(L) into each of the revealed inserts. Left Lateral Right Lateral Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 5 Left Lateral Right Lateral STEP 7 : Attach Lateral(PED-I) to the Modesty(MP-F) by inserting Cam Pins into Cam Locks. Lock Cams (Figure 1). PED-I MP-F MP-F PED-I Left Lateral Right Lateral Any problems or questions call Regency Office Furniture at 1-866-816-9822...
- Page 6 Cam Locks on the Modesty(MP-F) with Cam Caps(N). STEP 10B : If the cam pin inserts are not being utilized for a bridge connection, cover all cam pin inserts on the Leg(LG-D) with Insert Covers(T). Any problems or questions call Regency Office Furniture at 1-866-816-9822...
Need help?
Do you have a question about the ONCSLF7124 and is the answer not in the manual?
Questions and answers