Cleaning; Special Accessories; Technical Assistance Service - AEG 3000 D Operating And Installation Instructions

Cleaning

• Warning: always disconnect the hood from the mains power supply
before cleaning it.
Never insert pointed objects in the motor's protective grid.
• Wash the outside surfaces using a delicate detergent solution.
Never use caustic detergents or abrasive brushes or powders.
• Only ever clean the switch panel and filter grille using a damp cloth
and delicate detergents.
• It is extremely important to clean the unit and change the filters at
the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.

Special accessories

Carbon filter KF20

Technical assistance service

You are welcome to telephone our technical assistance service
(see list of technical assistance centres) whenever you need
information or in the unlikely event of a fault.
When calling, please be ready to specify:
1. The model code number
2. The serial number (E-Nr.)
3. The manufacturing number (F-Nr.)
This information is shown on the registration plate inside
the unit behind the grease filter.
We reserve the right to change specifications and colours as a
result of our policy of continuing technological development.
64
E-Nr. 942 120 600