Advertisement
OPERATION
The programming of the delayed cooking:
1.Press OK to get into the cooking duration setting mode, and set the desired cooking period
length (cooking duration) as per described in The programming of the cooking duration time.
2.After confirming the cooking duration setting with the OK key, press OK again to get into the
delayed cooking finishing time setting mode. At this time, both the cooking duration symbol
and the cooking finishing time symbol
are blinking. Set the wished delayed cooking finishing
time as per described in The programming of the cooking finishing time, and press OK to
confirm the setting.
3.After the delayed cooking is set, both the cooking duration symbol
and the cooking
finishing time symbol
are constantly on. That means the oven is programmed for delayed
cooking already.
4.Choose the cooking function and the wished cooking temperature. The oven remains turned
off till the time for the beginning of the delayed cooking arrives, then the oven will turn itself on
automatically.
5.After the set cooking finishing time, the oven turns itself off automatically. An acoustic signal
is generated, the cooking duration symbol and the cooking finishing time symbol start blinking,
and the power light goes off.
6.Press any key to turn off the signal, the oven will be back to the "Neutral" position and re-start
to work again. To stop the oven completely, turn the function and/or temperature knobs back
to "0".
Attention:
After a breakdown of the network voltage, the complete programming of the electric clock timer
will be deleted, after that, you have to set and program it again.
After setting the timer for any of the three functions: cooking duration, cooking finishing time,
and delayed cooking, you have to press OK to confirm it. Otherwise, the two Minute digits will
keep blinking, and the oven will not start to work.
If you want to change the setting of the timer during its operation, you need to press and hold
the OK key for 3 seconds to cancel it, and re-input.
14
Advertisement
