Table of Contents
Advertisement
ACTIVATE NORMAL PLAY MODE
This product is in Try-Me mode in the
packaging. To activate normal play mode,
please complete the following steps:
1. Slide the Off/Low/High Volume Switch
to the Off
2. Slide the Off/Low/High Volume Switch
to the Low or High Volume / position to
activate normal play mode.
INSTRUCTIONS
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use
a screwdriver to loosen the screw and then open the
battery cover.
3. Remove old battery by pulling up on one end of the battery.
4. Install 1 new AA (AM-3/LR6) battery following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended).
5. Replace the battery cover and tighten the screw to secure.
position.
4
Advertisement
Table of Contents
