Related Manuals for Stern CLASSIC Series
Summary of Contents for Stern CLASSIC Series
- Page 1 CLASSIC AB1953 CLASSIC 1000 AB1953 E L E C T R O N I C L AVAT O R Y F A U C E T CLASSIC SERIES InstallatIon and maIntenance guIde...
-
Page 2: Technical Data
INDEX TEChNICAL DATA TECHNICAL DATA PACK CONTENTS PRE-INSTALLATION INFO MAINTENANCE Filters cleaning instructions Care and cleaning of chrome and special finishes CLASSIC AB1953 291010 CLASSIC B AB1953 291110 CLASSIC E AB1953 291210 FAUCET INSTALLATION 8-11 SETTINGS ADJUSTMENT 12-13 BATTERY REPLACEMENT SPARE PARTS LIST LIMITED WARRANTY CLASSIC 1000 AB1953... -
Page 3: Pack Contents
CLASSIC CLASSIC PACk CoNTENTS PACk CoNTENTS AB1953 1000 AB1953 Familiarize yourself with the part names and confirm that the parts are included. Familiarize yourself with the part names and confirm that the parts are included. 1 x Allen Key 1 x Allen Key 1 x Faucet 1 x Faucet and accessories... -
Page 4: Pre-Installation Info
PRE-INSTALLATIoN INFo FAuCET INSTALLATIoN ChECK CONTENTS STEP 1 – PREPARATIoN FoR mouNTINg ThE FAuCET Separate all parts from the packaging and check each part with the “Pack contents” section. Pay attention to the different models variations. Make sure all parts are accounted for before discarding any packaging material. If any parts are missing, do not attempt to install your electronic faucet until you obtain the missing parts. - Page 5 FAuCET INSTALLATIoN FAuCET INSTALLATIoN STEP 3 – CoNNECTINg ThE wATER SuPPLy Connect the flexible pipe to the water supply. Remove the protective sticker from the For models with temperature control sensor connect the red flexible pipe to the hot water supply and the blue flexible pipe to the cold water supply.
-
Page 6: Settings Adjustment
SETTINgS ADjuSTmENT SETTINgS ADjuSTmENT DETECTION RANgE: Only if necessary, use the remote control to adjust the DETECTION DELAY OUT TIME sensor range as follows: RANgE Press the RANgE button. Wait until a quick flashing of the blue light in the sensor eye is perceived. - Page 7 SETTINgS ADjuSTmENT mANuAL SETTINgS ADjuSTmENT SECURITY TIME: The Security time, prevents continuous flushing of water The sensor range is the range an object can be away from the sensor in order to activate due to reflections or vandalism. By default, if the sensor is covered for the faucet.
-
Page 8: Battery Replacement
BATTERy REPLACEmENT BATTERy REPLACEmENT When the battery weakens, the red indicator light will blink at a constant rate. The battery must be replaced within two weeks. screw To replace the battery in Classic AB1953 \ Classic 1000 AB1953 models: Reconnect the electronic unit’s Carefully place the battery inside the connector to the solenoid connector. -
Page 9: Spare Parts List
BATTERy REPLACEmENT SPARE PARTS LIST When the battery weakens, the red indicator light will blink at a constant rate. The battery must be replaced within two weeks. Seals and Screws Kit for Classic AB1953 models 07210157 To replace the battery in Classic B AB1953\ Classic 1000 B AB1953 models: Seals and Screws Kit for Classic 1000 AB1953 models 07210154 10-Pack Sensor kit for Classic AB1953 &... -
Page 10: Limited Warranty
Low battery. Replace battery hands are within If a defect is found in normal use, Y. Stern Engineering Ltd. will, at its discretion, repair, the sensor’s range. provide a replacement part or product, or make appropriate adjustments. Damage 2. - Page 11 777 Passaic Avenue, Clifton NJ,07012, USA Tel: +1-973 773 8011 | Fax: +1-973-779-8768 Toll Free: 1-800-4364410 info@sternfaucets.com | tech@sternfaucets.com 08.17 015291000-D...
Need help?
Do you have a question about the CLASSIC Series and is the answer not in the manual?
Questions and answers