Maintenance - Oransi mod User Manual

M A I N T E N A N C E
INSTRUCTIONS ARE LISTED IN NUMERICAL ORDER. SOME NUMBERS ARE
REPRESENTED ON THE PHOTOS ON THE LEFT.
Easy Filter Replacement
1. Start by unplugging your air
purifier. Carefully place the unit
upside down on non-scratch
surfaces such as carpet with the
base facing up.
2. To unlock, move the slide switch
in number 2 to the right to unlock.
3. To loosen, turn the metal base of
the air purifier counterclockwise,
reference number 7.
4. To access the filter, lift off the
base of the air purifier.
5. To remove, pull the handle of the
air filter in number 5 to remove
and discard.
6. Next, insert a new HEPA filter with
the rubber seal facing in and
handle facing out. Twist the
handle slightly to make sure the
filter is fully seated in the
housing.
7. To reassemble, place the air
purifier base back on the housing.
Line up arrow on housing with the
arrow of the base (near the
"Close"). Turn the base of the air
purifier clockwise to tighten until
the arrow on the base is lined up
with the line near "Open" in
number 7.
8. To lock, move the slide switch to
the left similar to number 8.
9. To reset the check filter timer,
refer to number 9. Press and hold
the Filter Reset button beneath
the flashing light for a few
seconds. The light will turn off
when the filter counter is reset.
09