Oransi mod User Manual page 7

S M A R T U S E R I N T E R F A C E
c. Filter Replacement Indicator
The icon at bottom of the interface displays the life of the air
filter in four usage segments. At 4,500 hours, the indicator shows
red, and the filter should be replaced.
Filter Overview
The filter is a True HEPA Filter (99.97% at 0.3 microns) with a layer
of activated carbon. This filters out fine particulates and light
odors. Replace filter every 6-9 months of continuous use.
Around the HEPA filter is a sheer mesh screen, that is your
attached "pre-filter." This screen along the outside can be lightly
vacuumed to clean up accumulated dust and pet hair or dander, it
can also either be wiped down/off with a cloth. You should clean
off this outer layer of your Mod filter every 2-3 months for
improved airflow.
a. Powering On/Off
When powering on or off hold
down the power button. It will
take 3 seconds for the unit to
respond.
b. Fan Speed
To set fan speed, slide your
fingertip along the arc and
stop at the desired setting.
Sliding left lowers fan speed.
Sliding right increases fan
speed. This has an energy-
efficient EC motor so it will
take a few seconds for the fan
to reach the fan speed setting.
07